Post & Base: 9-1/2" x 9-1/2" E-Coated 7 gauge square steel base with textured powder-coat top finish, pre-drilled with four 1/2" holes. 6.25" long tight wound torsion spring with a 1.66" inside diameter, made of 1/2" diameter carbon steel wire. 1-5/8" outside diameter SS20 galvanized steel tubing. Height above grade 78”. Post secured to spring and base with 1/2" aluminum tear-away bolt on top, and 1/2" stainless steel bolt on bottom. Be unique; match your companies' colors to your poles, custom powder coating options available. Ground Mounting: 9-1/2" x 9-1/2" E-coated 7 gauge steel square plate, textured powder-coat top finish with 18" asphalt spike anchor. Four 1/2" stainless steel permanent threaded bolts that secure to standard base. Four 1/2" stainless steel washers and nylon insert lock nuts. Just hammer anchor into ground. Then set standard base onto unpaved ground base and tighten provided nuts and washers.

	Post & Base: 9-1/2" x 9-1/2" E-Coated 7 gauge square steel base with textured powder-coat top finish, pre-drilled with four 1/2" holes. 6.25" long tight wound torsion spring with a 1.66" inside diameter, made of 1/2" diameter carbon steel wire. 1-5/8" outside diameter SS20 galvanized steel tubing. Height above grade 78”. Post secured to spring and base with 1/2" aluminum tear-away bolt on top, and 1/2" stainless bolt on bottom. Be unique; match your companies' colors to your poles, custom powder coating options available. Ground Mounting: Four 1/2" stainless steel concrete expandable studs, with four 1/2" nylon insert lock nuts, and four 1/2" washers.

	Post & Base: 9-1/2" x 9-1/2" E-Coated 7 gauge square steel base with textured powder-coat top finish, pre-drilled with four 1/2" holes. 6.25" long tight wound torsion spring with a 1.66" inside diameter, made of 1/2" diameter carbon steel wire. 1-5/8" outside diameter SS20 galvanized steel tubing. Height above grade 78”. Post secured to spring and base with 1/2" aluminum tear-away bolt on top, and 1/2" stainless steel bolt on bottom. Be unique; match your companies' colors to your poles, custom powder coating options available. Ground Mounting: 9-1/2" x 9-1/2" E-coated 7 gauge steel square plate, textured powder-coat top finish with 18" asphalt spike anchor. Four 1/2" stainless steel permanent threaded bolts that secure to standard base. Four 1/2" stainless steel washers and nylon insert lock nuts. Four 1/4" x 3" tapcon asphalt screws for insertion to asphalt adapter's pre-drilled holes that provide horizontal wind load rigidity. Just hammer anchor into ground. Then set standard base onto asphalt base and tighten provided nuts and washers.